Storing your folding poker table

The system that I use for storing my table is a garage wall mount. It works very well because it keeps the padded railing (that you just spend so much time putting together) off the wall. I use at least 4” eyebolts for the wall mounts. These can be screwed into the wall right on the stud centers. A stud finder will help you locate the centers.

Figure 25.1: The underside eyebolts

Remember the eyebolts shown in Figure 8.1 and 8.2? These will be used with the bolts on the wall connected by two 6-8“ lengths of sturdy chain spread 48” apart on stud center. When you are at the hardware store, just use your best judgment on what size chain to use. The thickness of the chain in Figure 25.2 below works just fine. I also use a couple of small metal climbing rope clips at the ends of the chain to hook onto the table-mounted eyebolts.

<< Previous page | Next page >>